Expert Answers about Airstream Classic Travel Trailer
- Replacement Fan Motor For A Ventline BCS-3016-NSD Range Hood
- To replace the motor in your Ventline BCS-3016-NSD range hood you'll need the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood # BVD0218-00-R. This motor is a confirmed for your B-series range hood and includes the necessary wiring and mounting hardware for installation.
view full answer... - Can I Use the Die-Cast Grate for Furrion Range on a Dometic CU-423 Range
- We don't carry Dometic ranges and ovens, so I can't confirm this, but I do believe the CU-434 you've referenced is actually the range/oven combo that uses the same cooktop/range piece as part CU-423. Because of this, based off what some of our neighbors are saying the Furrion # CFSRE21SA002 is a good fit for your CU-423. We have not tested this ourselves though.
view full answer... - Replacement Tumbler Lock for th Toolbox on my 2019 Airstream Bambi
- We have several different locks available but they are not made specific to a particular camper. They will replace the tool box lock completely. You will choose the replacement based off of your depth of latch thickness. Or the distance from the mounting surface to the area the latch goes behind. They are designed to fit the common 3/4" hole found in most tool boxes and storage areas on RVs.
For instance the Camco Cam Lock part # CAM44340 is designed for a depth of latch thickness of 5/8"...
view full answer... - FM Antenna Recommendation for 2003 Airstream International 22 CCD
- The Jensen FM antenna part # AN519 would be a great option for the roof of your 2003 Airstream International. The cable that comes with it is 180 inches long and the mast is 31 inches which means it will be plenty long to install on your RV and provide great reception which is what our customers who have it have reported.
view full answer... - Is the Lippert Replacement Motor LC301695 an OEM Replacement
- The replacement motor part # LC301695 is a genuine Lippert part which is the OEM company that makes RV chassis.
view full answer... - Dark Replacement Cover for a Ventline V2119
- We do have the correct cover for your Ventline V2119 but the Vent Cover # BBC-0530-04 that you referenced is not it. This vent cover has a continuous hinge on it whereas the one you are looking for does not.
The cover you are needing instead is the Replacement Dome Assembly # BVD0449-A03. This fits your V2119 model so that you will have the assembly part # V2119-603-00.
This cover is darker than the blue/grey cover that you referenced and it will do a good job at keeping sunlight out...
view full answer... - Can 14K Equal-i-zer Weight Distribution System be Purchased With Extended Shank
- If you need to switch out the shank that comes with the Equal-i-zer Weight Distribution System part # EQ37140ET then go with the Equal-i-zer Weight Distribution System part #EQ37141ET and then just order the shank you need like the Equal-i-zer Weight Dist Shank part # EQ90-02-4600. I know a lot of people do this so they can lay the tailgate down with the trailer attached and this shank is long enough to let you do this on most trailers.
Please note, the most amount of rise/drop offered...
view full answer... - Lift Kit for a 2004 Airstream Triple Axle RV Trailer
- You can use two of the Torflex lift kits part # K71-724-02 on a triple axle trailer. We've checked with Dexter in the past and they have confirmed for us that this would work. There isn't a safety issue with the triple axle setups and these lift kits.
view full answer... - Is There a Manual Override for Lippert Electric Stabilizer Jack
- Yes there's a manual crank for the Lippert stabilizer jacks part # LC298707 with the part # LC119226.
view full answer... - Availability Of HWT Aluminum Split Spoke 6 Lug Wheel
- Hello mark, it sounds like you are looking for the HWT Aluminum Split Spoke wheel in a 6 lug. We do have the # AM22658HWTB which is silver with black interior. This is the only HWT Split Spoke Wheel we offer in a 6 lug at this time. We do have a few other similar aluminum wheels in a 6 lug and the link below will show you our full selection.
view full answer... - Bike Rack and Hitch for Ebikes on Trailer
- There is a way to carry your 53 lb ebikes on the back of your trailer, though the Swagman Around the Spare Deluxe 2 Bike Rack for RV Bumpers # S80501 has a 35 lb per-bike capacity so it would not work.
Instead, you need a hitch designed to be used on the back of a trailer, the Curt # 13703 which will work on box frames, C-channel frames, or I-beam frames that are between 22" and 72" wide. For a bike rack you need the Swagman E-Spec # S94FR because it is rated for use behind a trailer and...
view full answer... - Recommended Replacement for Black Atwood RV Propane Gas Detector 31013
- The RV Propane Gas Detector part # RS64FR for white or part # RS44FR for black is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a super clean install when finished. You'd just need to use some butt connector like part # DW05744-5 to attach the wires and you're good.
view full answer... - Airstream 12V Ventilator Bath Fan Replacement For A 2019 Airstream Classic
- Yes, the Ventline Vanair Trailer Roof Vent # VP-543SP is the correct replacement for your 2019 Airstream Classic.
Both roof vents will utilize the 6-1/4" rough opening size.
view full answer... - Recommended Weight Distribution System w/ Sway Control for a 5,200 lbs Travel Trailer
- For a weight distribution system that has built in sway control you are going to want the Blue Ox 2-Point Weight Distribution w/ Sway Control item # BLU82XR. This system has a tongue weight range of 600 lbs - 800 lbs which is typically 10% - 15% of your trailer's total weight.
The Blue Ox system uses L-brackets that keep the spring bars in place for a rigid system that holds your trailer in line. A 2-5/16" hitch ball is included along with a 2" shank that has a maximum drop of 2-3/4"...
view full answer... - Storage Options For A SnapRing TiresSavers Tire Cover
- The metal rings in the SnapRing TireSavers Tire Covers # ST7001WH can not be folded, but will lie completely flat for easy storage in your RV's cargo compartment when not in use.
The ring can be somewhat squeezed down if you were trying to store it inside of a box but I do not recommend really forcing it as this could damage the ring.
view full answer... - Recommended Weight Distribution System For a 2019 Airstream Classic 33FB
- The weight distribution system I recommend for a 2019 Airstream Classic 33FB is the Equal-i-zer Weight Distribution System part # EQ64FR which is rated for up to 16,000 lbs. The Equal-i-zer Weight Distribution System will perform better than the Blue Ox SwayPro Weight Distribution System part# BXW2000 and is more appropriately rated for the weight of your trailer. Please note, the Airstream Classic 33FB has an overslung coupler hence part # BXW2000 and not part # BXW2003.
If you still...
view full answer... - Replacement For Draw-Tite Friction Sway Control
- I believe you are talking about a friction sway control, and not all necessarily use the same size ball, no. We do have the friction sway control kit you are asking about which you can use as a replacement, though just the arm by itself isn't available as a replacement part so you'd need the whole kit, which is the following:
- Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch # 83660
I have added a link below to a video review for you to check out as well.
view full answer... - Black Roof Vent Cover Recommendation for Fan-Tastic Roof Vents
- For a black cover designed for Fan-Tastic roof vents we have the # DMC38FR which would fit and work well. This cover will allow your vent to stay open when it's raining.
view full answer... - Do You Grease Inside Of Dexter Nev-R-Lube Hub Or On The Spindle Before Installing The Hub?
- The Trailer Hub & Drum Assembly # 8-388-80UC3 you were looking at is designed specifically for 42mm Dexter Nev-R-Lube axles and you do not grease any of the components. This hub has sealed bearing cartridges which do not get greased.
Now if you were installing a standard hub with normal bearings then yes, you would pack the bearings with grease, and grease the spindle before installing the hub.
I included a video review of the # 8-388-80UC3 for you to take a look at.
view full answer... - Recommended High-Capacity Regulator For A 2022 Extreme Outdoors Micro Max
- For your 2022 Xtreme Outdoors Micro Max, I recommend going with the MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS.
This is a high-capacity, auto-changeover regulator like what you're looking for, with a flow-capacity of 500,000 Btu per hour.
Additionally, this regulator is made in the USA so you can be sure you're getting a quality part that'll work.
You're also going to need a pigtail # 100473-24-MBS to connect your regulator to your propane tank.
view full answer...
Go To Results